Novastar KU20 led display screen embedded software controller

Novastar KU20 COEX embedded software controller Features：

input Output:

• Giao diện đầu vào HDMI

1×HDMI 1.3 (with loop output).

• 10bit/8bit video source input
• Network port output

6 network ports, with a maximum load of 3.9 triệu pixel.

• Optical fiber output

1-way 10G optical fiber interface.

Advanced features:

• Screen zoom

Hỗ trợ 2 screen scaling modes, including custom and point-to-point.

• Full grayscale correction

With the Nova Nebula high-precision correction system and C3200 scientific-grade phase
The machine generates its own correction coefficient for each gray level to ensure that every
The uniformity of one level of gray scale significantly improves the display quality.

• Point-by-point chromaticity correction

Cooperating with the Nova Nebula high-precision correction system, the brightness of each light point is
Calibrate brightness and chromaticity to effectively eliminate differences in brightness and chromaticity
Differentiation makes the brightness and color of the entire screen highly consistent.

• Delay

− Supports low latency, 0 frame latency on the controller side (less than
1ms), and can achieve low latency without reducing load.
− Supports additional frame delay, the controller can add 0 to 2 frame delays Late.

• No rectangular frame limit

There is no rectangular frame limit when building a special-shaped screen. Leaving it blank does not count as loading. The network
The port loading is calculated as the superimposed sum of the resolutions of all screen cabinets.

• Frame rate adaptive

Adapt to various video input frame rates, including decimal frame rates. ủng hộ
User-definable frame rate and support for fine frame rates in 0.01Hz steps adjust.

• display system monitoring

Support equipment status monitoring and display status monitoring, and automatically
Report fault and alarm information.

• Two device working modes

Supports two working modes: video controller and independent master control. băng hình
In controller mode, layer and zoom functions are available.