MRV432 Novastar receiving card for digital electronic displays

Novastar MRV432 LED Screen Receiving Card Features：

Piksel darajasi yorqinlik va xroma kalibrlash
Novact va Novaclb bilan ishlash, Qabul kartasi har bir yoritilgan yorqinlik va xroma kalibrini qo'llab-quvvatlaydi, bu rang tafovutlarini samarali olib tashlashi va LED displeyda yorqin va xroma mustahkamligini oshirishi mumkin,Tasvir sifatini yaxshilashga imkon berish.

Qorong'u yoki yorqin chiziqlarni tezda sozlash
The dark or bright lines caused by splicing of modules or cabinets can be adjusted to improve the visual experience. The adjustment can be easily made and takes effect immediately.

· 3D funktsiyasi
Working with the sending card that supports 3D function, the receiving card supports 3D output.

· RGB uchun gamma sozlanishi
Novacct bilan ishlash (V5.2.0 yoki undan keyingi) and the sending card that supports this function, Qabul kartasi qizil gammani individual tuzatishni qo'llab-quvvatlaydi, yashil gamma va ko'k gamma,which can effectively control image nonuniformity under low grayscale and white balance offset, ko'proq real qiyofaga ruxsat berish.

· 90 ° oshishda rasm aylanishi
Displey tasviri 90 ° mulshiqda aylantirish uchun o'rnatilishi mumkin (0° / 90 ° / 270 °).

·Mapping function
The cabinets can display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.

·Setting of a pre-stored image in receiving card
The image displayed on the screen during startup, or displayed when the Ethernet cable is disconnected or there is no video signal can be customized.

·Temperature and voltage monitoring
The receiving card temperature and voltage can be monitored without using peripherals.

·Cabinet LCD
The LCD module of the cabinet can display the temperature, Kuchlanishi, single run time and total run time of the receiving card.

·Bite error detection
The Ethernet port communication quality of the receiving card can be monitored and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.

·Firmware program readback
The receiving card firmware program can be read back and saved to the local computer.
NovaLCT V5.2.0 or later is required.

·Configuration parameter readback
The receiving card configuration parameters can be read back and saved to the local computer.

Most pictures of MRV432 Novastar Receiving Card：