MRV432 Novastar receiving card for digital electronic displays

Novastar MRV432 LED Screen Receiving Card Features：

· Сатҳи равшанӣ ва каломат
Бо кор бо Новралк ва Номаклб кор кунед, Корти қабулкунанда ба пуррагӣ ва фиребгарии Кромома дастгирӣ мекунад, ки метавонад номувофиқатҳои рангро самаранок тоза кунад ва ба таври кофӣ такмил додани дисплеймоӣ ва мувофиқати кредмавӣ,имкон медиҳад, ки барои сифати беҳтар.

Тасдиқи хатҳои торик ё дурахшон
The dark or bright lines caused by splicing of modules or cabinets can be adjusted to improve the visual experience. The adjustment can be easily made and takes effect immediately.

Функсияи 29
Working with the sending card that supports 3D function, the receiving card supports 3D output.

· Танзими олии гамма барои RGB
Кор бо Новралхо (V5.2.0 ё дертар) and the sending card that supports this function, Корти қабулкунанда тасҳеҳи шахсии гаммаи сурхро дастгирӣ мекунад, Гамма ва Гамма кабуд,which can effectively control image nonuniformity under low grayscale and white balance offset, имкон медиҳад, ки барои тасвири воқеӣ.

· Ротизи · Дар 90 ° афзоиш
Тасвири намоишро барои гардиш дар зарбаҳои 90 ° таъин кардан мумкин аст (0° / 90 ° / 180 ° / 270 °).

·Mapping function
The cabinets can display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.

·Setting of a pre-stored image in receiving card
The image displayed on the screen during startup, or displayed when the Ethernet cable is disconnected or there is no video signal can be customized.

·Temperature and voltage monitoring
The receiving card temperature and voltage can be monitored without using peripherals.

·Cabinet LCD
The LCD module of the cabinet can display the temperature, Шиддат, single run time and total run time of the receiving card.

·Bite error detection
The Ethernet port communication quality of the receiving card can be monitored and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.

·Firmware program readback
The receiving card firmware program can be read back and saved to the local computer.
NovaLCT V5.2.0 or later is required.

·Configuration parameter readback
The receiving card configuration parameters can be read back and saved to the local computer.

Most pictures of MRV432 Novastar Receiving Card：