MRV432 Novastar receiving card for digital electronic displays

Novastar MRV432 LED Screen Receiving Card Features：

· Tingkat tingkat piksel sareng kalibrasi krbara
Gawe sareng Novalct sareng Novaclb, Kartu anu nampi Rojongan kacaangan sareng Calibration Calibration dina unggal LED, anu tiasa ngamangpaatkeun sikap naon waé sareng memang ningkatkeun kacaangan anu dipilampah pagelaran sareng konsistensi kromian,ngamungkinkeun pikeun kualitas gambar anu langkung saé.

· Adjustment gancang tina garis poék atanapi caang
The dark or bright lines caused by splicing of modules or cabinets can be adjusted to improve the visual experience. The adjustment can be easily made and takes effect immediately.

· 3D fungsi
Working with the sending card that supports 3D function, the receiving card supports 3D output.

· Adjustment gamma individu pikeun RGB
Gawe sareng Novalt (V5.2.0 atanapi engké) and the sending card that supports this function, Kartu nampi ngarojong adjustment individu tina Gamma Beureum, glama héjo sareng gamma biru,which can effectively control image nonuniformity under low grayscale and white balance offset, ngamungkinkeun gambar anu langkung realistis.

· Pariksa rotasi dina tanggal 90 ° Paningkatan
Gambar tampilan tiasa disetél pikeun muterkeun lebaran 90 ° (0° / 90 ° / 180 ° / 270 °).

·Mapping function
The cabinets can display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.

·Setting of a pre-stored image in receiving card
The image displayed on the screen during startup, or displayed when the Ethernet cable is disconnected or there is no video signal can be customized.

·Temperature and voltage monitoring
The receiving card temperature and voltage can be monitored without using peripherals.

·Cabinet LCD
The LCD module of the cabinet can display the temperature, Voltaseu, single run time and total run time of the receiving card.

·Bite error detection
The Ethernet port communication quality of the receiving card can be monitored and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.

·Firmware program readback
The receiving card firmware program can be read back and saved to the local computer.
NovaLCT V5.2.0 or later is required.

·Configuration parameter readback
The receiving card configuration parameters can be read back and saved to the local computer.

Most pictures of MRV432 Novastar Receiving Card：