MRV432 Новастар дижитал цахим дэлгэцэнд зориулсан картыг хүлээн авах

Novastar MRV432 LED Screen Receiving Card Features：

· Пикселийн түвшний тод байдал ба хрома тохируулга
Novalct болон Novaclb-тэй ажиллах, Хүлээн авах карт нь LED дээр гэрэлтэх, хромыг тохируулахыг дэмждэг, Өнгөний зөрүүг үр дүнтэй арилгаж, LED дэлгэцийн тод байдал, хромын тууштай байдлыг сайтар сайжруулж чадна,Илүү сайн зургийн чанарыг зөвшөөрөх.

Харанхуй эсвэл тод шугамыг хурдан тохируулах
The dark or bright lines caused by splicing of modules or cabinets can be adjusted to improve the visual experience. The adjustment can be easily made and takes effect immediately.

· 3D функц
Working with the sending card that supports 3D function, the receiving card supports 3D output.

· RGB-ийн хувь хүний ​​Гамма тохируулга
Novalct-тай ажиллах (V5.2.0 эсвэл түүнээс хойш) and the sending card that supports this function, Хүлээн авах карт нь Red Gamma-ийн бие даасан тохируулгыг дэмждэг, Ногоон гамма, цэнхэр гамма,which can effectively control image nonuniformity under low grayscale and white balance offset, Илүү бодит дүр төрхийг зөвшөөрөх.

· Зургийн эргэлт 90 ° нэмэгдэл
Дэлгэцийн зургийг 90 ° -ийн үржвэрт эргүүлэхийн тулд тохируулж болно (0° / 90 ° / 180 ° / 270 °).

·Mapping function
The cabinets can display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.

·Setting of a pre-stored image in receiving card
The image displayed on the screen during startup, or displayed when the Ethernet cable is disconnected or there is no video signal can be customized.

·Temperature and voltage monitoring
The receiving card temperature and voltage can be monitored without using peripherals.

·Cabinet LCD
The LCD module of the cabinet can display the temperature, цахилгаан хүчдэл, single run time and total run time of the receiving card.

·Bite error detection
The Ethernet port communication quality of the receiving card can be monitored and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.

·Firmware program readback
The receiving card firmware program can be read back and saved to the local computer.
NovaLCT V5.2.0 or later is required.

·Configuration parameter readback
The receiving card configuration parameters can be read back and saved to the local computer.

Most pictures of MRV432 Novastar Receiving Card：