MRV432 Nevastar saņemšanas karte digitālajiem elektroniskajiem displejiem

Novastar MRV432 LED Screen Receiving Card Features：

· Pikseļu līmeņa spilgtums un hroma kalibrēšana
Darbs ar Novalct un Novaclb, Saņemošā karte atbalsta spilgtumu un hroma kalibrēšanu katrā LED, kas var efektīvi noņemt krāsu neatbilstības un ievērojami uzlabot LED displeja spilgtumu un hroma konsistenci,Ļaujot labāku attēla kvalitāti.

· Ātra tumšu vai spilgtu līniju pielāgošana
The dark or bright lines caused by splicing of modules or cabinets can be adjusted to improve the visual experience. The adjustment can be easily made and takes effect immediately.

· 3D funkcija
Working with the sending card that supports 3D function, the receiving card supports 3D output.

· RGB individuālā gamma pielāgošana
Darbs ar Novalct (V5.2.0 vai vēlāk) and the sending card that supports this function, Saņemošā karte atbalsta sarkanā gamma individuālo pielāgošanu, zaļā gamma un zilā gamma,which can effectively control image nonuniformity under low grayscale and white balance offset, ļaujot iegūt reālistiskāku attēlu.

· Attēla rotācija 90 ° solī
Displeja attēlu var iestatīt tā, lai pagrieztos vairākos 90 ° daudzos (0°/90 °/180 °/270 °).

·Mapping function
The cabinets can display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.

·Setting of a pre-stored image in receiving card
The image displayed on the screen during startup, or displayed when the Ethernet cable is disconnected or there is no video signal can be customized.

·Temperature and voltage monitoring
The receiving card temperature and voltage can be monitored without using peripherals.

·Cabinet LCD
The LCD module of the cabinet can display the temperature, spriegums, single run time and total run time of the receiving card.

·Bite error detection
The Ethernet port communication quality of the receiving card can be monitored and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.

·Firmware program readback
The receiving card firmware program can be read back and saved to the local computer.
NovaLCT V5.2.0 or later is required.

·Configuration parameter readback
The receiving card configuration parameters can be read back and saved to the local computer.

Most pictures of MRV432 Novastar Receiving Card：