ບັດເງິນທີ່ໄດ້ຮັບ MRV432 ສໍາລັບການສະແດງເອກະສານທາງເອກະສານດິຈິຕອນດິຈິຕອລ

Novastar MRV432 LED Screen Receiving Card Features：

· pameel ລະດັບຄວາມສະຫວ່າງແລະການສອບທຽບ chroma
ເຮັດວຽກກັບ novalct ແລະ novaclb, ບັດໄດ້ຮັບສະຫນັບສະຫນູນຄວາມສະຫວ່າງແລະການສອບທຽບລົງໃນການສອບທຽບກັບແຕ່ລະຄັ້ງ, ເຊິ່ງສາມາດກໍາຈັດຄວາມແຕກຕ່າງຂອງສີທີ່ມີປະສິດຕິຜົນແລະປັບປຸງຄວາມສະຫວ່າງຂອງຈໍສະແດງຄວາມສົດໃສດ້ານການສະແດງແລະຄວາມສອດຄ່ອງຂອງ Chroma,ອະນຸຍາດໃຫ້ມີຄຸນນະພາບຂອງຮູບພາບທີ່ດີກວ່າ.

·ປັບຄວາມມືດຫລືສາຍສົດໃສ
The dark or bright lines caused by splicing of modules or cabinets can be adjusted to improve the visual experience. The adjustment can be easily made and takes effect immediately.

·ຟັງຊັນໃຫມ່
Working with the sending card that supports 3D function, the receiving card supports 3D output.

ການປັບຕົວ Gamma ຂອງບຸກຄົນສໍາລັບ RGB
ເຮັດວຽກກັບ Navalct (v5.2.0 ຫຼືຫຼັງຈາກນັ້ນ) and the sending card that supports this function, ບັດໄດ້ຮັບສະຫນັບສະຫນູນການປັບຕົວຂອງບຸກຄົນຂອງ gamma ສີແດງ, gamma ສີຂຽວແລະ gamma ສີຟ້າ,which can effectively control image nonuniformity under low grayscale and white balance offset, ອະນຸຍາດໃຫ້ມີຮູບພາບທີ່ແທ້ຈິງກວ່າ.

·ການຫມູນວຽນຮູບພາບໃນ 90 °ເພີ່ມຂື້ນ
ຮູບພາບການສະແດງສາມາດຖືກກໍານົດໃຫ້ຫມຸນໃນຕົວຄູນ 90 ° (0° / 90 °° / 180 ° / 270 °).

·Mapping function
The cabinets can display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.

·Setting of a pre-stored image in receiving card
The image displayed on the screen during startup, or displayed when the Ethernet cable is disconnected or there is no video signal can be customized.

·Temperature and voltage monitoring
The receiving card temperature and voltage can be monitored without using peripherals.

·Cabinet LCD
The LCD module of the cabinet can display the temperature, ແຮງຈິດໃຈ, single run time and total run time of the receiving card.

·Bite error detection
The Ethernet port communication quality of the receiving card can be monitored and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.

·Firmware program readback
The receiving card firmware program can be read back and saved to the local computer.
NovaLCT V5.2.0 or later is required.

·Configuration parameter readback
The receiving card configuration parameters can be read back and saved to the local computer.

Most pictures of MRV432 Novastar Receiving Card：