Novastar MX30 LED ეკრანის კონტროლის სერვერი

Novastar MX30 video wall control server Features：

input Output：

• Various video input interfaces

− 1×HDMI 2.0 (with loop output)
− 1×HDMI 1.4 (with loop output)
− 1×DP 1.1
− 2×3G-SDI (with loop output)

• 10bit/8bit video source input
• 3 output interfaces

− 10×Gigabit network port, with a maximum load of 6.5 მილიონი პიქსელი
− 2×10G optical port
− 1×SPDIF digital audio interface

• 3 control interfaces

− 1×Genlock synchronization signal input (with loop output)
− 2×Ethernet Ethernet control network port
− 1×AUX auxiliary interface

Advanced features：

• 3 separate layers

Supports adding up to 3 layers and adjusting them according to Z order priority.

• Screen zoom

მხარდაჭერა 4 screen scaling modes, including custom, point-to-point,
The curtain tiles and covers the screen.

• color calibration

მხარდაჭერა 12 standard colors derived from black and white and RGB three primary colors
Make precise adjustments to hue, saturation and brightness.

• HDR

− Support HDR10, compliant with SMPTE ST 2084 / SMPTE
ST 2086 standard.
− Support HLG.

• Full grayscale correction

With the Nova Nebula high-precision correction system and C3200 scientific-grade phase
The machine generates its own correction coefficient for each gray level to ensure
The uniformity of each level of gray scale significantly improves the display quality.

• Delay

− Supports low latency and can achieve low latency without reducing load. independent
In master control mode, controller side 0 frame delay (less than
1ms), in video controller mode, 1 frame delay on the controller side
Late.
− Supports additional frame delay, the controller can add 0 -მდე 2 frame delays Late.

• No rectangular frame limit

There is no rectangular frame limit when building a special-shaped screen. Leaving it blank does not count as loading. The network
The port loading is calculated as the superimposed sum of the pixels of all screen cabinets.

• Frame rate adaptive

Adapt to various video input frame rates, including decimal frame rates. მხარდაჭერა
User-definable frame rate and support for fine frame rates in 0.01Hz steps
adjust.

• Two device working modes

Supports two working modes: video controller and independent master control.
− In independent master mode, one frame delay can be reduced.
− In video controller mode, you can use functions such as multi-layer and zoom able.

• display system monitoring

Support equipment status monitoring and display status monitoring, and automatically
Report fault and alarm information.