MRV432 NOVESTAR PRIHVATNA KARTICA ZA Digitalne elektroničke zaslone

Novastar MRV432 LED Screen Receiving Card Features：

· Svjetlina razine piksela i kalibracija krom
Rad s Novalctom i Novaclb, Kartica za prijem podržava svjetlinu i kalibraciju kroma na svakom LED -u, koji mogu učinkovito ukloniti odstupanja u boji i uvelike poboljšati svjetlinu LED zaslona i kroma konzistenciju,omogućavajući bolju kvalitetu slike.

· Brzo podešavanje tamnih ili svijetlih linija
The dark or bright lines caused by splicing of modules or cabinets can be adjusted to improve the visual experience. The adjustment can be easily made and takes effect immediately.

· 3D funkcija
Working with the sending card that supports 3D function, the receiving card supports 3D output.

· Pojedinačno podešavanje gama za RGB
Rad s Novalctom (V5.2.0 ili noviji) and the sending card that supports this function, Kartica za primanje podržava pojedinačno prilagođavanje crvene gama, Zelena gama i plava gama,which can effectively control image nonuniformity under low grayscale and white balance offset, dopuštajući realniju sliku.

· Rotacija slike u koracima od 90 °
Slika zaslona može se postaviti za rotiranje u višestrukim od 90 ° (0°/90 °/180 °/270 °).

·Mapping function
The cabinets can display the receiving card number and Ethernet port information, allowing users to easily obtain the locations and connection topology of receiving cards.

·Setting of a pre-stored image in receiving card
The image displayed on the screen during startup, or displayed when the Ethernet cable is disconnected or there is no video signal can be customized.

·Temperature and voltage monitoring
The receiving card temperature and voltage can be monitored without using peripherals.

·Cabinet LCD
The LCD module of the cabinet can display the temperature, napon, single run time and total run time of the receiving card.

·Bite error detection
The Ethernet port communication quality of the receiving card can be monitored and the number of erroneous packets can be recorded to help troubleshoot network communication problems.
NovaLCT V5.2.0 or later is required.

·Firmware program readback
The receiving card firmware program can be read back and saved to the local computer.
NovaLCT V5.2.0 or later is required.

·Configuration parameter readback
The receiving card configuration parameters can be read back and saved to the local computer.

Most pictures of MRV432 Novastar Receiving Card：