Description
Linsn LED Receiving Card RV908M32 RV908H32 Features:
1. RV908M32 receiver card have 12 hub75 interface on board(supports 32 scan mode)，no extra hub card needed;
2. Supports 12-bit HDMI colors input (required the 9th generation sending card);
3. Using18-bit signal processor, maximum support 18-bit (260,000) gray (each of red, green and blue);
4. Single card maximum support 1024×768 pixels（Please note that there are recommended values depending on the design of LED screen）；
5. Single card can output 24 groups RGB data??/p>
6. Supports 138 decode, 595 serial decode and so on;
7. Supports pixel-by-pixel brightness and color calibration; single-card color space conversion??/p>
8. High refresh rate and high grey level with most of the driver ICs;
9. Supports general driver ICs and most of the PWM driver ICs;
10. Support hot backup with dual receiver cards for demanding performances screen;
11. Support network cable BER test??/p>
Linsn LED Receiving Card RV908M32 RV908H32 Controller Card System Synchronous and asynchronous
Linsn LED Receiving Card RV908H32 RV908M32
Linsn LED Video Processor X8406 / X8408 / X8414 / X8216 / X8212 / X8208 / X100 / X1000 / X2000 / X8000 / S100 / S3000
Linsn LED Sending Card TS802D / TS921
Linsn LED Sender Box TS16 / TS12 / TS08 / TS852D / TS951 / TS952 / TS952 PLUS / TS962 / 3D260 / TS802D Senders Card
Linsn LED Receiving Card RV320 / RV998 / RV926 / RV908M32 / RV908H32 / RV907H / RV905K / RV905H / RV904 / RV902 / RV901T / RV901H Receivers Card
Linsn LED Receving Card MINI910 / MINI909 / MINI908K / MINI908M / MINI903K / MINI903M / MINI902M / MINI901 Receivers Card
Linsn LED Control Box L1 / L2 / L3 / L4 / L5 / L6 AD Players
Linsn Accessories SC801 / MC801 / CN901 / EB901 / EX906D / EX902D
Linsn Software LEDStudio
